ILT970-VNIR Spectroradiometric Measurement Systems

ILT970-VNIR Spectroradiometric  Measurement Systems

ILT970-VNIR Spectroradiometric Measurement Systems

Part Number: ILT970-VNIR

Features:

  • Spectral range from 380 nm - 1040 nm
  • Easy to use
  • User-friendly SpectriLight software included
  • Reliable and trustworthy results
  • Choose from the most comprehensive selection of preconfigured light measurement 
    kits from the UV to NIR spectral range.
  • Fully characterized and calibrated kits with ISO 17025-certified processes.
  • Global Recalibration Centers in North America, Europe, and China.
  • Ideal for product development, inspection, quality control, performance validation, 
    and production


< Back to All Spectroradiometer Systems

ILT970-VNIR Spectroradiometric Measurement Systems

The ILT970-VNIR Spectroradiometric Measurement Systems optimized for the visible (VIS) and near-infrared (NIR) spectral regions calibrated from 380 nm to 1000 nm. Choose from seven (7) options for measuring spectral irradiance (W/ cm2-nm), spectral radiance (W/cm2-sr-nm), and spectral flux (W/nm). Each Spectroradiometer includes the VNIR spectrometer and optical fiber, an optical measurement head for spectral irradiance or spectral flux, a stand, SpectriLight III control software and DLLs, and a carry/storage case.


These Spectroradiometer Systems have been fully characterized and are calibrated for their spectroradiometric response following ISO 17025-certified processes, and supported by global recalibration centers in North America, Europe, and China.


VIS NIR Spectroradiometers for measuring:

• Spectral Irradiance, Irradiance, Illuminance and Color
• Spectral Radiance, Radiance, Luminance and Color
• Spectral Flux, Optical Power, Lumens and Color


Ideal for:
• Color Management
• Light Source Characterization
• Inspection, Validation, Production Test and R&D


Choose from the below, pre-configured kits, for an out-of-box spectral irradiance measurement solution.  Click on the below links for full system specifications and ordering information.
 

  • ILT970VNIR-RAA4 - Right angle adapter/diffuser head with 11 mm aperture and mini-integrating sphere for measuring spectral irradiance, total irradiance, and spectral characteristics of light sources
  • ILT970VNIR-W/A2 - Silica chip head with SMA adaptor for measuring spectral and total irradiance, illuminance, color parameters, and spectral characteristics of light sources.
  • ILT970VNIR-W5E - Miniature cosine correcting diffuser with SMA905 fiber adaptor for measuring spectral and total irradiance, color parameters, and spectral characteristics of light sources
  • ILT970VNIR-R2 - Optical Head with an average field of view of 2 degrees for measuring spectral and total radiance, luminance, color parameters, and spectral characteristics of extended light sources
  • ILT970VNIR-R3 - Small Spot, 500 mm fixed distance Optical Head for measuring spectral and total radiance, luminance, color parameters, and spectral characteristics of extended light sources
  • ILT970VNIR-INT50 - 5 cm (2”) integrating sphere for measuring forward and total spectral flux, power in watts, and spectral characteristics.
  • ILT970VNIR-INT150 - 15 cm (6”) integrating sphere for measuring forward and total spectral flux, power in watts, and spectral characteristics.

 

Versatile

The ILT970-VNIR can be paired with additional input optics. Each input optic requires its own unique calibrations, however multiple calibrations can be performed on a single spectrometer, allowing measurements of total flux (W, lm), irradiance (W/cm2), radiance (W/sr/cm2), luminance (cd/m2), and illuminance (lux) with just one system.

 

 Spectroradiometer Accessories

Click on image to go to Spectroradiometer Accessories page for additional, optional accessories.  Note:  Not all accessories are compatible with this spectroradiometer.

 

 

SpectrILight III Software
 

SpectrILight™ III is a LabView™ based software package for Windows that allows you to acquire spectral and color data. Analysis of the data is now calculated instantly within the same program - no exporting required!

 
SpectrILight™ III includes calculations for metamerism, and 2 and 10 degree observer. The overlay feature allows the user to compare the base reading to current readings. Wavelength range, integration time, scan average and other controls can be easily set through pop up windows, menus and tool bars. Absolute Irradiance and chromaticity are calculated instantly.
 

SpectrILight graph

 

QTH Irradiance@100CM

 

Specifications
Model ILT970VNIR-RAA4 ILT970VNIR-W/A2 ILT970VNIR-W5E ILT970VNIR-R2 ILT970VNIR-R3 ILT970VNIR-INT50 ILT970VNIR-INT150
Type VIS NIR Spectral Irradiance VIS NIR Spectral Irradiance VIS NIR Spectral Irradiance VIS NIR Spectral Radiance VIS NIR Spectral Radiance VIS NIR Spectral Flux VIS NIR Spectral Flux
Spectral Range of Spectrometer 350 nm to 1040 nm
Spectral Range of Calibration 900 nm to 1700 nm
Radiometric Dynamic Range (380-1000 nm) 1.63 E-02 to 7.31 E+02 W/cm2 6.42 E-02 mW/cm2 3.04 E-02 mW/cm2 3.35 E-03 mW/cm2/sr 4.91 E-02 mW/cm2/sr 1.54 E-05 to 8.75 E+02 W 1.60 E-04 to 9.1 E+02 W
Luminous Flux Range for 3200 QTH -- -- -- -- -- 3.7 E-04 to 53 lumen 3.6 E-03 to 517 lumen
Illuminance Range 4 to 178K lux 16 to 722K lux 8 to 340K lux -- -- -- --
Luminance Range -- -- -- 8.0 E-2 to 1.0 E+04 cd/m2 2.0 E-1 to 2.0 E+04 cd/m2 -- --
Integration Time Range 3.8 ms to 10 sec 3.8 ms to 10 sec 3.8 ms to 10 sec 3.8 ms to 10 sec 3.8 ms to 10 sec 3.8 ms to 10 sec 3.8 ms to 10 sec
Spectral Resolution 1.65 nm
Wavelength Accuracy 1 nm
Stray Light Rejection 2.3 AU
Fiber Length 1 m
Fiber Connections SMA-905
Optical Heads RAA4 W/A2 W5E R-2 R-3 INT50 INT150
Input Configuration Right Angle Parallel Parallel Radiance/ Luminance Optic w/2 Deg FOV Radiance/ Luminance Optic w/3 Deg FOV Sphere Entrance Port Sphere Entrance Port
Reference Plane Front Surface Front Surface Front Surface        
Active Sensor Area

0.27 in.
(6.9 mm) dia

1 in.
(15.2 mm) dia

0.157 in.
(4mm) dia
0.383 in.
(9.7 mm) dia
0.59 in.
(15.0 mm) dia
.28 in.
(7mm) input port
1.5 in.
(38mm) input port
Optical Head Dimensions .061in. (1.54cm) dia. by 0.44 inch (1.12 cm) tall 1.65 in. (4.19 cm) dia. by 1.29 in. (3.28 cm) tall 1.25 in. (0.64 cm) dia. by 0.79 in. (2.0 cm) long 1.54 in. (4.19 cm) dia. by 1.46 in. (3.70 cm) tall 1.98 in. (4.27 cm) base dia., 1.20 in. (3.05 cm) lens dia. by 2.40 (6.10 cm) tall 2 inch (5cm) dia. integrating sphere with 0.27 inch (7mm) entrance port and 0.5 inch (1.27 cm) near cosine fiber port 6 inch (15.24 cm) integrating sphere with 3 ports; 1.5 inch (3.8 cm) entrance port, 0.5 inch (1.24 cm) near cosine fiber port, and 1 inch (2.54cm) north entrance port with port plug
Spectrometer Dimensions HxWxL 3.46 inch (88 mm) x 2.51 inch (64 mm) x 1.22 inch (31 mm) 
Spectrometer Weight 276 g
Sphere Coating -- -- -- -- -- Spectraflect* Spectraflect*
Mounting 1/4-20 mounting thread with tripod 1/4-20 mounting thread with tripod 1/4-20 mounting thread with tripod 1/4-20 mounting thread with tripod 1/4-20 mounting thread with tripod 1/4-20 mounting thread with tripod 1/4-20 boss,
4 inch (10 cm) post holder, and 6 in x 6 in (15cm x 15cm) base 
Calibration Spectral Irradiance Response Spectral Irradiance Response Spectral Irradiance Response Spectral Radiance Response Spectral Radiance Response Spectral Flux Response Spectral Flux Response
Storage and Carrying Case Included
Software** SpectriLight III

* Spectraflect is a registered trademark of Labsphere.

**Computer Specifications
- A CPU or laptop with 1GHz processor, 1GB of RAM, 256GB hard drive, and a screen resolution of 1024 x 768
- Operating system:  Windows 11 or later
- Microsoft .Net Framework 4.5 or later needs to be installed and enabled