ILT1000 Rugged, Compact, Multi-purpose, Multi-point Smart Sensor for Measuring Peak Exposure

audience scanning laser/light measurement system

ILT1000/F/A313-7MM

Part Number: ILT1000/F/A313-7MM US
$2,132.00

Smart Sensor for Audience Scanning Laser/Light Measurements

  • Wired & WIRELESS Versions Available
  • Ideal for Performing Multi-Point, Wireless, Remote Light Monitoring & Data Logging
  • “Set It & Forget It” Remote Data Logging with On-Board Data Storage
  • Multi-System Continuous Monitoring (up to 32 systems with one hub)
  • 4 Open Licensed, Customer-Configurable Software Options
  • 6 Decade Dynamic Range of Optical Analysis
  • Autorange, Autodark with Manual Control Options
  • 4-20 mA Output
  • Auto-Sample Rate Configuration to Reduce Noise
  • NIST-Traceable Calibration and Certificate
  • Many Pre-Configured Application-Specific Detector/Filter/Optics Combinations Available
  • Custom and OEM Version Inquiries Welcome
  • Made in USA
  • Size: 76.2 x 76.2 x 25.4 mm (3" x 3" x 1")
  • Weight: 173 g (less than 0.5 lbs)

 

< Back to Audience Scanning & Laser Safety Table

< Back to Flash Measurement Systems Table

ILT1000-silicon-detector-f-filter-spectrum

Rugged, Compact, Multi-purpose, Multi-point Smart Sensor for Measuring Peak Exposure

The ILT1000/F/A313-7MM Audience Scanning Laser Light Measurement Kit makes taking laser light show measurements simple, fast, reliable and repeatable.

 

ILT worked with a group of audience scanning laser safety experts to customize the ILT1000/F/A313-7MM and the peak capture software reducing measurement time from a over a half hour to just a few minutes. The system was configured to allow rapid measurements of peak exposure for single and/or multiple lasers of any combination of colors and provides an easy readout in W/cm2.

 

Along with peak capture mode, the ILT software also had the added ability to measure the total dosage or exposure in J/cm2 with the click of the mouse or a tap on the screen. (Separate systems and/or optics are available to allow testing of the total laser power of individual lasers in Watts.)

 

Measurement Range: 4e-9 to 5e-2 Watts/cm2
Spectral Range: 400 - 1000 nm
Order part numbers: ILT1000, F/A313-7MM filter/diffuser with customized 7 mm aperture and PIR calibration

 

ILT1000-peak-light-level-screen

For the latest meter specifications, data sheet, installation guide, tech notes and software, visit the ILT1000 page here.

 

To view additional Flash Measurement systems, visit our application page here.